G.A.L. Bridge Cam Gauge
BENEFITS
Measures all essential weld geometry parameters in seconds using a single compact tool, eliminating the need to carry multiple gauges and speeding up visual inspection routines.
FEATURES
Capable of measuring weld crown height, fillet weld leg length, fillet throat thickness, preparation angle (0° to 60°), and fit-up gap dimensions.
BENEFITS
Ensures strict visual inspection compliance with AWS D1.1, ASME, and EN ISO 5817 acceptance criteria, while permanent laser-etched scales prevent wear and reading errors.
FEATURES
Dual metric (mm) and imperial (inch) deep laser-engraved scales, knurled locking thumb screw, and 0.5 mm / 1/64″ precision indicator pointer.
All VITRENEMEL grades typically are furnished with a rough matte finish to improve adhesion of the enamel coating. The approximate surface roughness is 55 to 90 micro-inches. A rougher surface finish, 90 to 150 micro-inches, can be provided if required for a specific application.
The dimensional tolerances for VITRENEMEL Steel Sheet products are the same as those for Cold Rolled Steel Sheet as established by ASTM.
BENEFITS
Built to withstand high-temperature weld zones, harsh fabrication shops, and outdoor job sites without bending, rusting, or dimensional distortion.
FEATURES
Hardened stainless steel solid construction, deburred and wear-resistant edges, supplied with a protective leather storage pouch.
G.A.L. Bridge Cam Gauge
A versatile, multi-purpose stainless steel weld inspection gauge designed to accurately measure preparation bevel angles, fillet weld sizes, crown reinforcement, and undercut depths in full compliance with visual testing codes.
- Steel Construction, Bridge & Viaduct Fabrication
- Pressure Vessel, Boiler & Pipeline Weld Inspections
- Shipbuilding, Shipyard & Offshore Structures
- Heavy Machinery Manufacturing & Visual Testing (VT) Inspections
G.A.L. V-WAC Single Weld Gauge
BENEFITS
Quickly verifies weld edge undercut depths and crown reinforcement heights within seconds, identifying fatigue and cracking risks before components enter service.
FEATURES
Measurement range from 0 to 6 mm (0 to 1/4 inch) for undercut and crown height with 0.5 mm and 1/64 inch indicator pointer accuracy.
All VITRENEMEL grades typically are furnished with a rough matte finish to improve adhesion of the enamel coating. The approximate surface roughness is 55 to 90 micro-inches. A rougher surface finish, 90 to 150 micro-inches, can be provided if required for a specific application.
The dimensional tolerances for VITRENEMEL Steel Sheet products are the same as those for Cold Rolled Steel Sheet as established by ASTM.
BENEFITS
Enables rapid comparison of surface porosity cluster sizes and counts against AWS D1.1 and ASME Section IX acceptance criteria to streamline visual testing (VT) reporting.
FEATURES
Integrated 1.5 mm (1/16 inch) and 3 mm (1/8 inch) reference hole markers, porosity-per-inch scale, and knurled locking thumb screw.
BENEFITS
Pocket-sized slim profile and wear-resistant body provide effortless inspections in tight spaces, pipe interiors, and high-elevation work sites.
FEATURES
Laser-engraved dual metric and imperial scales, hardened stainless steel construction, and protective carry pouch.
G.A.L. V-WAC Single Weld Gauge
A compact stainless steel visual inspection gauge designed to accurately check undercut depth, weld crown reinforcement height, and surface porosity dimensions against international welding codes.
- Pressure Vessels, Boilers & Pipeline Welds
- Steel Structures & Industrial Bridge Fabrication
- Shipbuilding & Offshore Inspections
- Non-Destructive Testing (NDT / VT) Visual Quality Inspections
G.A.L. Hi-Lo Welding Gauge
BENEFITS
Accurately verifies internal surface misalignment (hi-lo) and root gap width prior to pipe butt-welding, preventing improper fit-up, incomplete root penetration, or excessive burn-through.
FEATURES
0 to 30 mm internal misalignment measurement range, integrated 1.6 mm (1/16 inch) root gap spacing prong, and spring-loaded retractable reference feet.
BENEFITS
Complies with API 1104, ASME B31.3, and AWS D1.1 piping standards; speeds up field inspections by measuring pipe wall thickness, bevel angle, and weld reinforcement with a single tool.
FEATURES
37.5° bevel angle check, pipe wall thickness scale, permanent laser-engraved dual metric/imperial graduations, and locking thumb screw.
All VITRENEMEL grades typically are furnished with a rough matte finish to improve adhesion of the enamel coating. The approximate surface roughness is 55 to 90 micro-inches. A rougher surface finish, 90 to 150 micro-inches, can be provided if required for a specific application.
The dimensional tolerances for VITRENEMEL Steel Sheet products are the same as those for Cold Rolled Steel Sheet as established by ASTM.
BENEFITS
Operates smoothly inside tight pipes, elbow fittings, and overland pipeline installations; hardened stainless steel body resists spatter, abrasives, and mechanical wear.
FEATURES
Slim-profile corrosion-resistant stainless steel body, precision-ground contact feet, and heavy-duty protective carry case.
G.A.L. Hi-Lo Welding Gauge
A specialized stainless steel welding and alignment gauge engineered to measure internal misalignment (hi-lo), fit-up root gap, preparation bevel angle, and wall thickness across pipe and plate assemblies.
- Oil, Gas & Refinery Pipeline Installations
- Power Plants & High-Pressure Steam Lines
- Shipbuilding & Offshore Piping Systems
- Chemical, Petrochemical & Industrial Plant Fabrication