Sonatest Wave
BENEFITS
Live simulation of ultrasonic beam paths and reflections directly on real component geometries visually pinpoints the exact depth and location of internal flaws, eliminating signal misinterpretation risks.
FEATURES
Integrated part geometry drawing tool, real-time interactive A-Scan ray tracing, and curved surface correction algorithms.
BENEFITS
Automatically generates DAC, TCG, and DGS/AVG evaluation curves according to EN ISO 11666, ASME, and AWS D1.1 codes, while built-in Wi-Fi enables direct on-site PDF reporting to accelerate workflows.
FEATURES
Multi-curve DAC/TCG and DGS/AVG tools, full dynamic A-Scan recording, integrated Wi-Fi / USB connectivity, and customizable PDF reporting engine.
BENEFITS
Glove-compatible multi-touch capacitive display allows smartphone-like intuitive parameter adjustments and swift calibrations without navigating dense legacy menus.
FEATURES
High-resolution anti-glare touchscreen, IP67-rated rugged enclosure, lightweight balanced form factor, and long-life swappable battery pack.
Sonatest Wave
A state-of-the-art digital ultrasonic flaw detector featuring interactive real-time ray tracing and an intuitive multi-touch interface that maps internal discontinuities directly onto real component geometry.
- Quality Control Of Welds, Forgings And Castings
- Ultrasonic Testing (UT) For Petrochemical, Refinery And Pipelines
- Discontinuity Analysis For Aerospace, Composite And Metallic Structures
- Inspection Of Power Plants, Pressure Vessels And Turbine Shafts
Sonatest Masterscan
BENEFITS
Delivers deep penetration and exceptional signal-to-noise ratio (SNR) across highly attenuative cast alloys and composites using an advanced square wave pulser architecture.
FEATURES
Configurable square-wave pulser voltage (100V to 450V), active edge damping, wideband receiver (0.2 MHz to 20 MHz), and measuring range up to 20,000 mm.
BENEFITS
Facilitates rapid and definitive flaw acceptance/rejection decisions across welds, forgings, and structural steel in full compliance with ASME, AWS D1.1, API, and EN codes.
FEATURES
Integrated DAC, split-DAC, TCG, DGS/AVG, and AWS D1.1 sizing tools, automatic gate tracking, and full dynamic A-Scan data logging.
All VITRENEMEL grades typically are furnished with a rough matte finish to improve adhesion of the enamel coating. The approximate surface roughness is 55 to 90 micro-inches. A rougher surface finish, 90 to 150 micro-inches, can be provided if required for a specific application.
The dimensional tolerances for VITRENEMEL Steel Sheet products are the same as those for Cold Rolled Steel Sheet as established by ASTM.
BENEFITS
Operates reliably in desert heat and heavy downpours thanks to a sunlight-readable transflective color display and rugged IP67 sealed casing.
FEATURES
IP67 environmental sealing, impact-absorbing rubber bumpers, glove-friendly rotary wheel interface, and up to 16-hour continuous battery life.
Sonatest Masterscan
A heavy-duty portable digital ultrasonic flaw detector equipped with a high-voltage adjustable pulser and advanced signal processing, engineered for demanding inspections in thick-wall components, castings, and forgings.
- Heavy-Wall Fillet And Butt Weld Inspection
- Quality Control Of Heavy Industry Castings And Large-Scale Forgings
- Inspection Of Petrochemical Reactors, Pressure Vessels And Refinery Lines
- Flaw Analysis For Aerospace And Defense Composites/Alloys
Sonatest Sitescan
BENEFITS
Delivers rapid signal response for general weld, pipe, and structural steel inspections, instantly identifying internal discontinuities to maximize inspector speed and reliability in the field.
FEATURES
Broadband receiver architecture (0.5 MHz to 10 MHz), adjustable spike/square pulser, measurement range up to 10,000 mm, and intuitive navigation wheel.
BENEFITS
Built-in sizing curves fully aligned with ASME, AWS, and EN standards allow sound velocity and probe angle calibrations in seconds, ensuring complete inspection compliance.
FEATURES
Integrated DAC, TCG, and AWS D1.1 evaluation tools, automatic gate peak tracking, and instant A-Scan freeze mode.
BENEFITS
Effortless all-day portability in dusty, wet, and confined job sites thanks to a lightweight chassis and sunlight-readable transflective color display.
FEATURES
IP67 environmental sealing, impact-resistant rugged enclosure, glove-friendly keypad layout, and up to 16 hours of continuous Li-ion battery operation.
Sonatest Sitescan
A rugged, entry-to-mid level portable digital ultrasonic flaw detector tailored for field inspections and fabrication workshops, featuring all-day battery endurance and comprehensive standard-compliant sizing tools.
- Weld Inspection For Steel Structures And Bridges
- Oil, Gas Pipeline And Refinery Inspections
- Ultrasonic Testing (UT) For Shipbuilding, Deck And Hull Plating
- In-Service Periodic Equipment Maintenance And Flaw Detection
Sonatest Railscan / RSflite
Benefits
Optimized signal architecture tailored specifically for rail profiles, aluminothermic, and flash butt welds enables immediate on-track detection of transverse fissures, slag inclusions, and fatigue flaws.
Features
Dedicated rail testing software routines, multi-angle probe configuration support, high-repeatability pulser control, and automated flaw depth/location calculations.
Benefits
Fully compliant with international rail standards including EN 16729, UIC codes, and Network Rail requirements, guaranteeing complete retrospective traceability with logged dynamic data.
Features
Integrated EN/UIC rail evaluation criteria, full dynamic A-Scan and B-Scan data recording, and track chainage/location tagging functionality.
Benefits
Minimizes operator fatigue during long walking track inspections thanks to an ultra-lightweight chassis and harness ergonomics, delivering crisp visibility under intense sun or night shifts.
Features
P67 environmental sealing, sunlight-readable color transflective LCD display, tactile glove-friendly buttons, and up to 16 hours of continuous Li-ion battery life.
Sonatest Railscan / RSflite
A specialized, high-performance portable ultrasonic flaw detector engineered specifically for on-track maintenance, rail profile scanning, and aluminothermic/flash butt weld integrity testing.
- Thermite And Flash Butt Rail Weld Inspection
- Periodic In-Service Inspection Of High-Speed Train And Conventional Lines
- Fatigue Crack Analysis For Turnouts, Crossings/Frogs And Rail Heads
- Inspection Of Metro, Tramway And Urban Rail Transit Systems
Dakota FX71-DL
BENEFITS
Combines full-featured ultrasonic flaw detection with precision thickness gauging into a single unit, eliminating the need for two separate devices during weld, forging, and corrosion audits.
FEATURES
Live A-Scan and B-Scan cross-sectional views, Echo-Echo Thru-Paint measurement mode, Pulse-Echo flaw detection architecture, and measuring range from 0.63 mm to 25,400 mm.
BENEFITS
Features built-in ASME, AWS D1.1, and API sizing tools paired with an extensive internal data logger to capture and organize thousands of inspection points in grid or sequential formats.
FEATURES
Integrated DAC, TCG, DGS/AVG, and AWS D1.1 evaluation tools, up to 4 GB internal SD card storage, full dynamic A-Scan capture, and CSV/PDF export capability.
BENEFITS
Provides maximum mechanical resistance against drops, shocks, and harsh refinery/shipyard conditions with an extruded aluminum case and a high-visibility sunlight-readable color display.
FEATURES
IP65-sealed extruded aluminum body, gasketed tactile membrane keypad, high-brightness color display, and up to 12 hours of continuous Li-ion battery operation.
Dakota FX71-DL
A versatile, heavy-duty portable ultrasonic instrument that merges full-function A/B-scan flaw detection with advanced through-paint thickness gauging and comprehensive data logging capabilities.
- Corrosion Inspection Of Oil, Gas Pipelines And Storage Tanks
- Butt And Fillet Weld Inspection For Steel Structures And Bridges
- Thickness Mapping For Pressure Vessels, Boilers And Steam Circuits
- Internal Flaw Analysis For Castings, Forgings And Heavy Machinery Parts