SMA
BENEFITS
Quickly verifies peak-to-valley profile height on blasted surfaces with a reading speed exceeding 50 readings per minute; prevents excessive paint consumption and ensures coating adhesion quality.
FEATURES
5% accuracy, durable field-replaceable tungsten carbide probe tip (up to 20,000 readings lifetime), and integral or separate probe configuration options.
BENEFITS
Complies fully with global surface preparation standards such as ASTM D4417 Method B and SSPC-PA 17; simplifies inspection workflows by analyzing batch readings on the spot.
FEATURES
Internal memory storage up to 150,000 readings, average peak-to-valley and statistical calculations (min, max, standard deviation), and seamless data transfer via USB and Bluetooth® to ElcoMaster®.
BENEFITS
Delivers stable, long-lasting performance without downtime across heavily dusted blast rooms, open-air shipyards, and abrasive job sites.
FEATURES
IP64-rated dust- and splash-resistant sealed enclosure with a scratch- and solvent-resistant color LCD screen.
SMA
They are a base material in applications that do not require any formability beyond minimal bending and/or roll-forming.
- Large and Small Electric Motors
- High-Efficiency Industrial Pumps
- Compressors and HVAC Units
- Domestic Appliance Motors
MMA
BENEFITS
Delivers low watt loss without requiring subsequent annealing due to its fully processed condition; reduces energy consumption and operational operating temperatures in electric motors.
FEATURES
Optimized chemical alloy for minimized hysteresis and eddy current losses, high magnetic flux density, and stable magnetic permeability.
BENEFITS
Eliminates post-punching heat treatment costs, furnace cycles, and distortion risks, enabling direct assembly on automated production lines.
FEATURES
Outstanding punchability and shearing edge quality, minimal burr formation, and specialized surface finish engineered to extend stamping die life.
BENEFITS
Ensures tight air-gap tolerances and maximum magnetic mass density within rotor and stator lamination cores.
FEATURES
Tight gauge tolerances achieved through precision cold rolling, superior strip flatness, and an exceptionally high stacking factor.
MMA
They are fully processed magnetic steel sheets engineered for applications requiring high magnetic permeability, low core loss, and excellent punchability without the need for subsequent customer annealing.
- Small and Medium Electric Motors
- High-Efficiency Industrial Pumps
- Compressors and HVAC Units
- Domestic Appliance Motors
LMA
BENEFITS
Minimizes hysteresis and eddy current losses at high operating frequencies, preventing overheating, extending equipment lifespan, and increasing energy efficiency.
FEATURES
Optimized chemical composition for reduced eddy current losses, high magnetic induction, and homogeneous magnetic permeability.
BENEFITS
Ensures uniform magnetic flux distribution across precision lamination layers, minimizing losses across rotor and stator air gaps.
FEATURES
Tight gauge thickness tolerances, excellent strip flatness, and a high stacking factor that enables compact core assembly.
BENEFITS
Reduces maintenance downtime and manufacturing costs by preventing burrs and minimizing tool wear in high-speed stamping presses.
FEATURES
Optimized microstructure engineered for high-speed slitting and blanking, uniform mechanical hardness, and clean shear edge formation.
LMA
They are a base material in applications that do not require any formability beyond minimal bending and/or roll-forming.
- High-Efficiency Servo & Stepper Motors
- Automotive Alternators & Electric Drives
- Industrial Inverter-Duty Motors
- Hermetic Compressor Motors
TSMA
BENEFITS
Delivers high torque generation through a balanced chemical alloy and specialized heat treatment; lowers magnetic losses to maximize operating efficiency.
FEATURES
High saturation magnetization, optimized grain structure, and a controlled silicon/alloy composition ensuring low hysteresis loss.
BENEFITS
Prevents distortion in high-speed rotating rotor assemblies; maintains tight air-gap tolerances to minimize mechanical vibration and operational noise.
FEATURES
High mechanical yield strength, outstanding surface parallelism, and tightly controlled gauge thickness via precision cold rolling.
BENEFITS
Prevents burr formation during precision blanking and laser cutting, extending tooling lifespan and speeding up downstream core assembly.
FEATURES
Uniform internal stress distribution, blanking-optimized surface roughness, and a controlled hardness profile delivering clean shear edges.
TSMA
Engineered magnetic steel sheets designed for specialized rotating machinery requiring high rotational stability, precise lamination stacking, and dependable electromagnetic output.
- High-Speed Traction Motors
- Permanent Magnet Synchronous Motors (PMSM)
- Precision Electric Actuators & Stepper Systems
- Heavy-Duty Industrial Turbogenerators
STARC
BENEFITS
Minimizes the risk of tearing and local thinning in complex geometries, ensuring stable, scrap-free production during demanding press operations.
FEATURES
High plastic strain ratio (r-value), superior work-hardening exponent (n-value), and an optimized metallurgical microstructure tailored for deep drawing.
BENEFITS
Ensures exceptional adhesion for paint, enamel, and metallic coatings in visible decorative applications, preventing surface imperfections and corrosion risks.
FEATURES
Controlled surface roughness (balanced Ra/RPc), uniform cold-rolled finish, and a clean, blemish-free strip surface.
BENEFITS
Extends die life across automated blanking and bending lines while minimizing springback variations to deliver tight assembly tolerances.
FEATURES
Tight thickness tolerances, tightly controlled yield and tensile strength limits, and consistent mechanical properties throughout the coil.
STARC
Cold-rolled commercial and deep-drawing quality steel sheets engineered for critical forming, stamping, and surface-sensitive industrial applications.
- Automotive Body Panels & Interior Stampings
- White Goods & Major Household Appliances
- Electrical Enclosures & Switchgear Cabinets
- Radiators, Drums & Press-Formed Containers
TSTARC
BENEFITS
Shapes effortlessly in demanding multi-stage press and deep-draw operations without cracking, driving scrap rates close to zero across intricate tooling geometries.
FEATURES
High plastic strain ratio (r̄-value), outstanding elongation capability, and an ultra-low carbon/annealed microstructure tailored for deep drawing.
BENEFITS
Delivers flawless visual homogeneity on exposed Class-A outer panels; ensures exceptional bonding for primers, powder coatings, and plating.
FEATURES
Controlled surface roughness, passivation/oiling protection, and a clean, blemish-free precision cold-rolled surface finish.
BENEFITS
Delivers consistent bending angles and tight dimensional tolerances during high-volume forming, ensuring precise fit-up and faster assembly line speeds.
FEATURES
Tight yield-to-tensile ratio, uniform gauge profile, and predictable elastic springback behavior via tightly controlled hardness ranges.
TSTARC
Extra deep-drawing quality cold-rolled steel sheets specifically developed for intricate automotive stampings, exposed aesthetic panels, and high-precision metal forming applications.
- Exposed Class-A Automotive Body Panels
- Complex Deep-Drawn Domestic Appliance Shells
- Precision Stamped Automotive Structural Parts
- Hermetic Compressor Housings & End Covers
QCG - QW
BENEFITS
Enables high-precision calibration of ultrasonic instruments and transducers, minimizing operator measurement deviations in flaw sizing and spatial positioning.
FEATURES
Reference notch and side-drilled hole geometries compliant with international NDT standards, uniform acoustic velocity, and controlled attenuation.
BENEFITS
Eliminates false indications and parasitic internal reflections, delivering a sharp, stable signal-to-noise ratio (SNR) even at high testing frequencies.
FEATURES
Manufactured from vacuum-degassed specialized steel, isotropic fine-grain structure, and 100% internal ultrasonic cleanliness verification.
BENEFITS
Retains reference geometry and critical tolerances under demanding shop and field conditions, ensuring dependable, repeatable calibration over years of service.
FEATURES
Micrometer-level CNC machining tolerances, controlled surface finish (Ra $\le$ 0.8 µm), and protective anti-corrosion surface treatments.QCG - QW
They are a base material in applications that do not require any formability beyond minimal bending and/or roll-forming.
- Ultrasonic Flaw Detector & Probe Calibration
- Weld Joint Beam Index & Angle Verification
- Thickness Gauging & Velocity Measurement Calibration
- Structural Steel & Pressure Vessel Weld NDT
PQC - QW
BENEFITS
At Fabrik, we empower our customers to shape the future. Our Motor Steel is a specialized cold-rolled sheet product meticulously engineered to optimize the performance of electromagnetic core materials in electrical equipment components. These steels are designed to minimize energy losses, ensuring efficient utilization of electrical energy input into motors.
FEATURES
Our motor lamination sheets are meticulously cold-rolled below their recrystallization temperature, offering precise control over product shape, thickness, dimensions, and surface finish. We produce a variety of steel grades, with each grade primarily differentiated by its specific Core Loss requirement. These grades are provided in a semi-processed, unannealed state and must undergo annealing after punching the laminations to unlock their optimal magnetic properties.
BENEFITS
Eliminates internal scattering and metallurgical noise to provide sharp, false-indication-free, and repeatable echo signals even at high gain levels.
FEATURES
Vacuum-degassed alloy steel with a uniform fine-grain structure, isotropic acoustic velocity, and tightly controlled attenuation characteristics.
BENEFITS
Maintains critical geometric form in harsh pipeline, shipyard, and shop environments, preventing reference drift over repeated field use.
FEATURES
CNC-machined reference edges with tight micron tolerances, fine surface roughness and durable anti-corrosion protective plating.
PQC - QW
Portable ultrasonic calibration blocks designed for quick on-site beam verification, angle calibration, and sensitivity reference settings during manual weld seam inspections.
- Angle-Beam Probe Index & Angle Verification
- On-Site Ultrasonic Flaw Sizing & Calibration
- Pipeline & Pressure Vessel Weld Examination
- Structural Steel Fabrication NDT Audits
PSS & SW / SNW
BENEFITS
Maximizes reliability in critical component inspections by enabling clear differentiation of shallow subsurface flaws and closely spaced discontinuities.
FEATURES
Reference design featuring side-drilled holes (SDH) and precision notch geometries; allows thorough verification of acoustic axis resolution and transducer sensitivity.
BENEFITS
Eliminates material scattering and ghost echoes to provide a clean, stable A-scan response during high-sensitivity inspections requiring high gain levels.
FEATURES
Isotropic sound velocity distribution, vacuum-degassed fine-grained homogeneous steel construction, and 100% verified acoustic transmissibility.
BENEFITS
Maintains dimensional and acoustic stability under demanding field and laboratory conditions, guaranteeing complete audit compliance with international standards.
FEATURES
Micrometer-level CNC machining tolerances fully compliant with ISO, EN, and ASME standards, controlled surface finish, and durable anti-corrosion plating.
PSS & SW / SNW
Specialized ultrasonic calibration blocks designed for sensitivity setup, distance-amplitude correction (DAC/TCG), and resolution verification during angle-beam and normal-beam inspections.
- Large and Small Electric Motors
- Generators
- Ballasts
- Transformers
SSG & SW / SNW
BENEFITS
Delivers accurate DAC/TCG calibrations for both straight and angle-beam probes, ensuring high repeatability in discontinuity depth and size estimation.
FEATURES
Precision side-drilled holes (SDH) at calibrated depth increments, curved reference radii, and tight-tolerance artificial flaw reflectors.
BENEFITS
Eliminates volumetric scattering and phantom echoes to maintain a high signal-to-noise ratio (SNR) even at maximum inspection gain settings.
FEATURES
Grain-controlled vacuum-degassed forged steel, isotropic acoustic velocity profile, and 100% verified acoustic transmissibility.
BENEFITS
Resists wear across demanding shop and field environments while ensuring full audit compliance with third-party inspection agency standards.
FEATURES
Micrometer-precision CNC ground tolerances, controlled surface finish, protective anti-corrosion finish, and certified dimensional verification.
SSG & SW / SNW
Precision ultrasonic calibration blocks engineered for distance amplitude correction (DAC), time-corrected gain (TCG) generation, and probe sensitivity calibration during critical weld seam evaluations.
- DAC / TCG Distance-Amplitude Calibration Curves
- Angle-Beam Flaw Sizing & Depth Location
- Pipe, Header & Pressure Vessel Weld Examinations
- Heavy Structural & Marine Fabrication NDT Audits
SHM & LHM
BENEFITS
Eliminates the risk of missing deep-seated flaws in heavy forgings, castings, and thick plate inspections by accurately profiling acoustic attenuation over extended sound paths.
FEATURES
Calibrated step-depth side-drilled holes (SDH) designed for long sound-path calibration, extended reference scanning surfaces, and precisely positioned artificial discontinuities.
BENEFITS
Suppresses microstructural scattering even across heavy volumes, ensuring weak indications from deep flaws are captured with an exceptional signal-to-noise ratio
FEATURES
Premium vacuum-degassed forged alloy steel body, isotropic acoustic propagation, uniform fine grain morphology, and 100% verified internal discontinuity-free integrity.
BENEFITS
Preserves critical calibration tolerances against hostile shop, forging, and field conditions, delivering uncompromised repeatability for third-party auditing.
FEATURES
Precision ground flat reference faces with micrometer-grade tolerances, low surface roughness, anti-corrosion protective plating, and fully traceable calibration documentation.
SHM & LHM
Heavy-duty ultrasonic calibration blocks designed for short and long sound-path sensitivity setup, depth verification, and distance amplitude correction (DAC) in heavy-section industrial inspections.
- Heavy Forgings & Castings Volumetric Examination
- Extended Range DAC / TCG Curve Plotting
- Turbine Shaft, Rotor & Thick Shell Testing
- Heavy Wall Pipeline & Pressure Vessel Seam Audits
SLF
BENEFITS
Ensures accurate detection of vertical cracks and near-surface discontinuities in thin sheets and narrow cross-sections, minimizing near-surface blind zones.
FEATURES
Dedicated micro-calibration notches for Rayleigh surface waves and shear wave transducers, precision-curved reference faces, and tightly controlled depth slots.
BENEFITS
Suppresses metallurgical background noise during high-frequency micro-flaw inspections to provide exceptionally sharp and discrete echo indications.
FEATURES
Homogeneous forged steel microstructure with low acoustic attenuation, isotropic sound transmission velocity, and 100% verified internal ultrasonic cleanliness.
BENEFITS
Resists geometric wear from repeated transducer contact during routine field calibrations, delivering dependable consistency for inspection reporting.
FEATURES
Micrometer-tolerance machined notch depths, controlled optical-grade surface grinding, and durable anti-corrosion protective finish.
SLF
Specialized ultrasonic reference blocks designed for surface-wave (Rayleigh) and shear-wave sensitivity calibration, resolution verification, and near-surface flaw evaluations.
- Surface-Wave (Rayleigh) & Creeping Wave Probe Calibration
- Near-Surface Crack Sizing & Depth Measurement
- Thin Sheet, Cladding & Plating Flaw Evaluations
- Critical Turbine Blade & Aerodynamic Component Audits
PSLF
BENEFITS
Increases inspection productivity by enabling probe calibration in seconds across confined job sites, scaffolding, and in-service pipeline locations thanks to its compact, lightweight format.
FEATURES
Portable ergonomic body, precision-positioned reference notches for surface and shear waves, and calibrated depth steps.
BENEFITS
Prevents unexpected downtime and component failures by enabling the early detection of subsurface micro-cracks and incipient fatigue defects.
FEATURES
Low-noise reference geometry optimized for Rayleigh surface waves and high-angle probes, controlled notch widths, and homogeneous acoustic velocity.
BENEFITS
Preserves reference notch geometry against wear and corrosion under harsh site conditions, ensuring traceable repeatability in inspection results over years of service.
FEATURES
Micrometer-grade CNC EDM notch machining tolerances, precision-ground surface finish, and nickel/chrome protective plating.
PSLF
Portable ultrasonic reference blocks designed for on-site sensitivity setup, beam angle checks, and flaw depth sizing of near-surface cracks and surface-breaking defects.
- On-Site Surface & Rayleigh Wave Calibration
- Stress Corrosion & Fatigue Crack Sizing
- Aircraft Skin & Airframe Structural Audits
- In-Service Pipeline & Pressure Equipment NDT
SLM
BENEFITS
Accurately maps sound path travel and beam geometry during inspection, eliminating operator measurement variations when sizing and locating discontinuities.
FEATURES
Side-drilled holes (SDH) calibrated to specific sound path distances, stepped reference depths, and precision-curved reflector profiles suited for angle-beam probes.
BENEFITS
Dampens internal scattering and spurious echoes to deliver sharp, stable, and well-resolved signal quality during high-gain, high-sensitivity inspections.
FEATURES
Fine-grained homogeneous forged steel ensuring isotropic sound velocity, tightly controlled attenuation characteristics, and 100% verified defect-free internal integrity.
BENEFITS
Resists wear and scratches across rigorous shop and field environments, delivering reliable long-term calibration repeatability for periodic inspection audits.
FEATURES
Micrometer-grade precision CNC machining and grinding tolerances, optical-grade surface finish, and durable anti-corrosion protective plating.
SLM
Standard ultrasonic calibration blocks engineered for beam spread evaluation, angle verification, sensitivity calibration, and depth-amplitude profiling in critical component inspections.
- DAC / TCG Curve Generation & Beam Angle Verification
- Transducer Sensitivity & Resolution Checks
- Structural Weld Seam & Plate Examinations
- Heavy Machinery & Forging Quality Audits
PSLM
BENEFITS
Boosts inspection productivity by enabling rapid probe verification in tight-access field environments, scaffolding, and erection sites through its compact, lightweight design.
FEATURES
Portable ergonomic construction, rapid sound-beam index point and angle verification geometries, and calibrated depth reference steps.
BENEFITS
Easily compensates for sound-path attenuation directly in the field; dampens internal noise to deliver dependable, repeatable A-scan echo indications.
FEATURES
Side-drilled holes (SDH) calibrated to designated depths, isotropic acoustic velocity, and a homogeneous steel matrix delivering a high signal-to-noise ratio (SNR).
BENEFITS
Retains its geometric form against repeated frictional wear in aggressive field conditions, ensuring continuous compliance with periodic audit requirements.
FEATURES
Micrometer-precision CNC ground tolerances, low surface roughness (Ra $\le$ 0.8 µm), and durable anti-corrosion protective plating.
PSLM
Portable ultrasonic reference blocks designed for on-site angle-beam verification, sound path calibration, and flaw depth sizing in field weld inspections and structural audits.
- On-Site Transducer Angle & Index Point Checks
- Field DAC / TCG Sensitivity Curve Calibration
- Structural Steel & Girth Weld Examinations
- In-Service Plant Piping & Pressure Vessel NDT
SMM & LMM
BENEFITS
Delivers accurate calibration across variable sound paths, ensuring high precision in sizing and depth evaluation for both near-surface and deep-seated discontinuities.
FEATURES
Side-drilled holes (SDH) spaced for short and long acoustic ranges, precision-machined reference radii, and calibrated depth steps.
BENEFITS
Dampens metallurgical scattering and ghost indications, ensuring faint reflections from deep flaws are captured with a high signal-to-noise ratio (SNR).
FEATURES
Vacuum-degassed forged alloy steel with an isotropic fine-grain matrix, uniform sound velocity, and 100% verified internal volumetric cleanliness.
BENEFITS
Retains strict geometric tolerances against wear under tough field and shop conditions, providing long-term measurement repeatability for third-party auditing.
FEATURES
Micrometer-grade precision CNC grinding tolerances, optical-level surface finish, protective anti-corrosion plating, and traceable certification.
SMM & LMM
Combined ultrasonic calibration blocks engineered for short and medium-to-long sound-path sensitivity setup, DAC/TCG generation, and angle-beam verification in critical industrial components.
- Multi-Range DAC / TCG Curve Generation
- Angle-Beam & Normal-Beam Transducer Verification
- Heavy Machinery & Forged Shaft Volumetric NDT
- Pressure Equipment & Thick-Walled Welded Joints
RDT
BENEFITS
Shifts the initial pulse recovery outside the test piece via the delay line, enabling accurate detection of shallow subsurface flaws and gauging of ultra-thin wall sections.
FEATURES
Replaceable acrylic delay line, highly damped piezoelectric crystal element, and acoustic isolation design minimizing near-surface dead zone interference.
BENEFITS
Extends total transducer operational life and sharply lowers consumable costs by allowing the friction-worn plastic tip to be replaced independently of the probe assembly.
FEATURES
Threaded quick-change tip retaining mechanism, standard and high-temperature delay line options, and wear-resistant polymer tip construction.
BENEFITS
Provides secure finger grip and uniform contact pressure in oily, narrow, or awkward inspection geometries, ensuring repeatable acoustic coupling and clean signal response.
FEATURES
Knurled metallic housing shell, side-entry Microdot (Subvis) coaxial connector, and a compact base footprint.
RDT
Replaceable delay line ultrasonic contact transducers designed for high-precision thickness measurement, near-surface flaw detection, and thin-walled component testing.
- Precision Thin-Sheet & Wall Thickness Gauging
- Near-Surface Flaw & Delamination Detection
- Small-Diameter Tubing & Thin Pipe Audits
- Aerospace Skin & Bonded Composite Evaluations
CD
BENEFITS
Eliminates the initial pulse dead-zone interference through separate transmitter and receiver elements, accurately capturing near-surface pitting, erosion, and thinning.
FEATURES
Dual-element focused acoustic beam configuration, minimized front-surface dead zone, and high near-surface axial resolution.
BENEFITS
Prevents direct acoustic bleed from the transmitter to the receiver element, displaying weak corrosion reflections with an outstanding signal-to-noise ratio (SNR).
FEATURES
Sound-dampened acoustic crosstalk barrier between elements, inward-angled roof geometry, and highly damped piezoelectric crystal pair.
BENEFITS
Retards faceplate wear on pitted, corroded, and unmachined pipe surfaces while providing rugged electrical coupling and long operational life via dual connectors.
FEATURES
Wear-resistant stainless steel cylindrical housing, integral wear faceplate, and top-entry dual Subvis / Microdot (optional Lemo) T/R connector layout.
CD
Dual-element (twin crystal) compression wave ultrasonic transducers designed for residual wall thickness measurement, in-service corrosion profiling, and near-surface flaw detection in pipelines and process equipment.
- Residual Wall Thickness & Remaining Life Gauging
- In-Service Pipeline & Tank Corrosion Mapping
- Pitting, Erosion & Laminar Flaw Characterization
- Boiler Tubes, Castings & Rough Surface Inspections
D
BENEFITS
Eliminates the initial pulse dead-zone through independent transmitter and receiver crystals, accurately detecting localized pitting and residual wall thinning across pipes and storage tanks.
FEATURES
Dual-element (twin crystal) compression wave configuration, focused acoustic roof-angle zone, and high near-surface axial resolution.
BENEFITS
Blocks direct sound transmission between the transmitting and receiving elements, delivering clear echo waveforms with a high signal-to-noise ratio (SNR) even on rough, corroded surfaces.
FEATURES
Integrated acoustic crosstalk barrier separating elements, highly damped piezoelectric ceramic elements, and an engineered acoustic beam path.
BENEFITS
Side-entry integral cable and knurled compact profile allow easy handling and steady scanning across tight pipe bends, elbows, and restricted-access locations.
FEATURES
Knurled metallic outer housing, wear-resistant contact face, and side-mounted integral twin cable assembly with molded strain relief.
D
Compact dual-element (twin crystal) compression wave ultrasonic transducers designed for residual wall thickness measurement, erosion profiling, and corrosion mapping in confined and hard-to-reach industrial assets.
- Corrosion & Erosion Mapping on Process Piping
- Residual Wall Thickness Gauging on Confined Assets
- Small-Bore Pipe, Tube & Boiler Inspection
- Pitting Detection on Storage Tanks & Pressure Vessels
DEM
BENEFITS
Eliminates the initial pulse ring-down via separated transmitter/receiver crystal architecture, cleanly resolving shallow subsurface pitting and residual thin-wall losses.
FEATURES
Dual-element focused roof-angle geometry, minimized front-surface dead zone, and high axial near-surface resolution.
BENEFITS
Prevents internal acoustic leakage from the transmitter directly to the receiver, generating clean echo indications with a high signal-to-noise ratio (SNR) even at peak gain settings.
FEATURES
Built-in acoustic crosstalk barrier isolating the elements, heavily damped piezoelectric crystal pair, and engineered acoustic matching layer.
BENEFITS
Miniature footprint and knurled outer casing ensure a secure grip and stable coupling pressure across pipe bends, tight elbows, and confined access locations.
FEATURES
Knurled stainless steel cylindrical housing, stepped nose profile, wear-resistant contact face, and dual stacked Microdot (Subvis) connector configuration.
DEM
Miniature dual-element compression wave ultrasonic transducers equipped with dual Microdot connectors, engineered for precision remaining wall thickness measurement and near-surface pitting detection in confined geometries.
- Small-Bore Piping & Tube Wall-Loss Gauging
- Near-Surface Pitting & Localized Corrosion Mapping
- Confined Space, Valve & Fitting Thickness Audits
- Boiler Tube & Heat Exchanger NDT Examinations
PDEM
BENEFITS
Eliminates the front-surface dead zone via dual transmitter/receiver elements, delivering outstanding axial resolution for ultra-thin wall gauging and micro-pitting detection up to 15 MHz.
FEATURES
Dual-element focused roof-angle geometry, high-frequency piezoelectric crystal pair, highly damped backing, and minimized near-surface dead zone.
BENEFITS
Shields the active crystal elements from direct frictional wear while blocking acoustic crosstalk from transmitter to receiver, maintaining a clean signal-to-noise ratio (SNR) at high gains.
FEATURES
Wear-resistant polymer protected face, integrated acoustic crosstalk barrier between elements, and high signal-to-noise ratio (SNR) acoustic design.
BENEFITS
Stepped nose profile and knurled outer shell enable secure finger handling and uniform contact coupling inside tight elbows, weld toes, and narrow recessed cavities.
FEATURES
Knurled stainless steel casing, stepped cylindrical nose for restricted access, and vertically stacked gold-plated dual Microdot (Subvis) connectors.
PDEM
Protected-face miniature high-frequency dual-element ultrasonic transducers engineered for precision remaining wall thickness measurement, micro-pitting sizing, and shallow subsurface flaw detection in confined geometries.
- Ultra-Thin Wall & Precision Remaining Thickness Gauging
- Micro-Pitting & Localized Subsurface Flaw Detection
- Small-Bore Tubing, Heat Exchanger & Boiler Audits
- Confined Space, Valve Body & Fitting Wall-Loss Monitoring
RB
BENEFITS
Adapts easily to curved, rough, or undulating test geometries via its elastomeric dome tip, minimizing acoustic couplant consumption and subsequent surface clean-up time.
FEATURES
Flexible elastomer/rubber contact face, low acoustic impedance mismatch, and stable sound transmission over variable incidence contact angles.
BENEFITS
Yields clean backwall reflections across carbon-fiber-reinforced polymers (CFRP) and honeycomb sandwich panels, streamlining the identification of delaminations and skin-to-core disbonds.
FEATURES
Damped piezoelectric crystal optimized for attenuative composites, high signal-to-noise ratio (SNR), and wideband frequency response.
BENEFITS
The wear-prone elastomeric tip can be serviced independently to extend transducer longevity, while the knurled casing prevents slippage for consistent scanning pressure.
FEATURES
Knurled heavy-duty brass/stainless steel housing, threaded replaceable membrane retainer, and side-mounted Microdot (Subvis) coaxial connector.
RB
Specialized elastomeric soft-tip ultrasonic contact transducers engineered for composite testing, dry/semi-dry coupling inspections, and delamination detection on curved or uneven surfaces.
- CFRP & Aerospace Composite Delamination Testing
- Honeycomb Sandwich Disbond & Skin Integrity Audits
- Inspections Requiring Minimal or Couplant-Free Scanning
- Curved, Textured & Undulating Surface Evaluation
Sonapen
BENEFITS
Delivers millimeter-precise point contact in narrow grooves, turbine blade roots, and around fastener/rivet heads where standard-sized transducers cannot physically access.
FEATURES
Replaceable sharp-taper acoustic delay line cone, micro-sized high-frequency piezoelectric crystal, and a tightly focused acoustic sound beam.
BENEFITS
Shifts initial pulse ring-down away from the test piece via the delay tip, yielding crisp echo separation in ultra-thin sheets, coatings, and shallow near-surface cracks.
FEATURES
Heavily damped piezoelectric element, near-zero front-surface dead zone, and wideband high-frequency acoustic response.
BENEFITS
Handled just like a writing pen, allowing the operator to guide the probe with fingertip precision for jitter-free, stable scanning across critical micro-geometries.
FEATURES
Knurled stainless steel/aluminum finger-grip section, lightweight pencil form factor, rear-mounted micro coaxial connector, and threaded quick-change tip collet.
Sonapen
Ultra-miniature pencil-style ultrasonic contact transducers equipped with tapered delay tips, designed for pinpoint thickness measurement and flaw detection in extremely confined spaces, fastener holes, and curved geometries.
- Aircraft Fastener Holes, Rivet Rows & Airframe Curves
- Turbine Blades & Narrow Root Geometry Inspections
- Pinpoint Remaining Wall Thickness Gauging on Miniature Tubing
- Precision Spot Checking in Recessed Pockets & Welds
THM
BENEFITS
Delivers deep acoustic penetration across heavily corroded, attenuative, and thick-walled process piping via its optimized 2 MHz low frequency and 10 mm large crystal aperture.
FEATURES
Dual-element (twin crystal / T-R) focused roof-angle geometry, high-energy piezoelectric crystal pair, and optimized near-surface axial resolution.
BENEFITS
Blocks direct sound transmission from the transmitter to the receiver element, cleanly capturing weak reflections from deep pitting and corroded backwalls with an outstanding signal-to-noise ratio (SNR).
FEATURES
Integrated acoustic crosstalk barrier isolating elements, highly damped internal composite backing, and reliable echo discrimination.
BENEFITS
The threaded lower wear ring shields the probe assembly from abrasive surface friction to maximize service life, while the textured side panels prevent slippage during oily or gloved inspections.
FEATURES
Threaded mechanical wear protection collar, non-slip textured ergonomic grip panels, and stacked dual Microdot / Lemo coaxial connector ports.
THM
Dual-element (twin crystal) heavy-duty ultrasonic compression wave transducers engineered for remaining wall thickness measurement, deep corrosion mapping, and flaw evaluation in thick-walled, attenuative industrial assets.
- Heavy-Wall Pipeline & Vessel Residual Thickness Gauging
- Deep Corrosion & Severe Pitting Mapping
- Attenuative Castings, Forgings & Rough Plate Inspections
- In-Service Plant Assets & High-Wear Monitoring Audits
FCG & PFC
BENEFITS
The lightweight, fingertip-sized housing enables easy access to confined spaces, curved surfaces, and complex part geometries, reducing operator fatigue while enhancing scanning precision.
FEATURES
Compact ergonomic stainless steel case, knurled outer shell finish for positive finger grip, and lightweight construction.
BENEFITS
Offers a balanced acoustic response thanks to its medium damped configuration, providing high axial resolution for near-surface flaw discrimination while ensuring deep penetration across thick components.
FEATURES
High-efficiency piezoelectric crystal element, medium damped acoustic design, and optimized wide frequency bandwidth.
BENEFITS
Extends transducer service life and maintains measurement integrity by resisting degradation during manual contact scanning over rough, scaly, and unmachined metal surfaces.
FEATURES
Hard ceramic or hardened steel protective wear faceplate, rugged sealed assembly, and side-entry Microdot (Subvis) coaxial connector.
FCG & PFC
Compact single-element compression wave contact transducers designed for fingertip-controlled ultrasonic inspection in confined spaces, complex geometries, and localized flaw detection across a wide range of industrial materials.
- General Volumetric Flaw Detection in Restricted Access Areas
- High-Precision Remaining Wall Thickness Measurement
- Inspection of Bars, Billets, and Small Forgings
- Localized Corrosion Mapping and Pitting Assessment
SLP
BENEFITS
Provides seamless acoustic contact within narrow flange clearances, pipe supports, and restricted-headroom assemblies where standard-height transducers cannot physically fit.
FEATURES
Low-profile (pancake) ultra-compact body height, side-entry Microdot (Subvis) coaxial connector, and lightweight construction.
BENEFITS
Accelerates flaw detection and lamination scanning across broad plate areas via large 10 mm and 15 mm circular piezoelectric element options.
FEATURES
High-efficiency single-crystal piezoceramic disc (10D / 15D configurations), wideband frequency response, and balanced acoustic damping.
BENEFITS
Prevents finger slippage during manual scanning across oily or rough surfaces while extending operational life via a durable wear-resistant faceplate.
FEATURES
Circumferential knurled stainless steel/brass outer shell, wear-resistant ceramic contact faceplate, and sealed environmental housing.
SLP
Low-profile single-element compression wave contact transducers engineered for direct-contact thickness measurement and volumetric flaw detection in height-restricted and confined industrial locations.
- Height-Restricted & Low-Headroom Direct Contact Scanning
- Pipe-to-Support & Flange Clearance Inspections
- Lamination & Volumetric Defect Detection in Steel Plates
- Precision Wall Thickness Gauging on Structural Members
PIM
BENEFITS
Provides consistent acoustic coupling without mechanical surface contact inside water tanks, eliminating contact-pressure variations for highly repeatable signal response.
FEATURES
Acoustic impedance matching layer optimized for liquid immersion, high-efficiency piezoelectric element, and stable sound beam profile.
BENEFITS
Completely prevents internal component corrosion and electrical shorting during continuous submersion in water tanks or squirter test environments.
FEATURES
O-ring sealed waterproof threaded connector interface, corrosion-resistant stainless steel cylindrical casing, and hermetically sealed internal potting.
BENEFITS
Mounts smoothly into standard tank manipulators and automated C-scan scanning bridges, facilitating fast, automated inline and laboratory inspections.
FEATURES
Knurled top retaining collar, precision-machined cylindrical body diameter for standard fixtures, and top-entry threaded waterproof coaxial connector.
PIM
Waterproof single-element immersion ultrasonic transducers engineered for non-contact volumetric flaw detection, thickness verification, and high-resolution automated scanning in immersion tanks and bubbler systems.
- Automated C-Scan Tank Inspections & Plate Mapping
- Aerospace Composite & Bonded Structure Disbond Testing
- High-Precision Non-Contact Thin-Wall Thickness Gauging
- Shafts, Bars & Precision Machined Tubing Volumetric Checks
STP
BENEFITS
Perfectly conforms to curved and textured component geometries via its soft elastomeric contact face, minimizing liquid couplant dependency and subsequent surface cleanup costs.
FEATURES
Specially formulated compliant elastomer wear face, low acoustic impedance mismatch, and non-marring surface contact profile.
BENEFITS
Delivers clean, high signal-to-noise ratio (SNR) echo indications across attenuative composite laminates, clearly resolving delaminations and skin-to-core disbonds.
FEATURES
Heavily damped piezoelectric crystal design, fast pulse-recovery internal backing, and broadband frequency response.
BENEFITS
Knurled extension handle provides steady scanning pressure and agile maneuvering over complex curves, while the replaceable elastomer pad maximizes probe service life.
FEATURES
Knurled aluminum/brass housing and handle assembly, threaded replaceable tip retaining ring, and rear-entry gold-plated micro-coaxial connector.
STP
Soft-tip elastomeric ultrasonic contact transducers engineered for composite testing, dry or semi-dry coupling inspections, and delamination detection across curved and sensitive aerospace structures.
- CFRP Aerospace Skin & Composite Laminate Inspections
- Honeycomb Sandwich Structure Disbond & Void Audits
- Dry & Semi-Dry Coupling Inspections on Sensitive Surfaces
- Curved, Textured & Non-Metallic Component Flaw Testing
RP
BENEFITS
Eliminates the need for liquid or gel couplants to reduce post-inspection cleanup costs and downtime, enabling rapid, continuous rolling scans over large structural surfaces.
FEATURES
Specially formulated acoustically transmissive elastomeric tire, dry-coupled inspection capability, and rotary-axis acoustic coupling design.
BENEFITS
Delivers clean backwall echo profiles across carbon-fiber-reinforced polymers (CFRP) and sandwich structures, promptly highlighting delaminations, porosity, and skin-to-core disbonds.
FEATURES
5 MHz high-sensitivity internal piezoelectric element tailored for composites, high signal-to-noise ratio (SNR), and wideband frequency response.
BENEFITS
Precision-bearing fork mechanism ensures smooth line-tracking over flat and curved panels, while the field-replaceable elastomeric tire ensures long-term operational continuity.
FEATURES
Rigid stainless steel/aluminum mounting yoke and handle assembly, low-friction precision bearings, replaceable rolling tire, and internal coaxial signal transfer.
RP
Dry-coupled ultrasonic wheel probes engineered for rapid, couplant-free scanning, composite delamination detection, and thickness monitoring across large-area aerospace and industrial structures.
- CFRP Aerospace Skin & Fuselage Delamination Audits
- Rapid Couplant-Free Large-Area Composite Scanning
- Honeycomb Core-to-Skin Disbond & Void Detection
- Wind Turbine Blades & Marine Composite Structure Integrity
Thickness Gauge Transducers – Dual Crystal
BENEFITS
Eliminates the initial pulse dead-zone through separated transmitter and receiver elements, precisely gauging thin wall-loss and localized pitting across pipes, tanks, and steel plates.
FEATURES
Dual-crystal focused roof-angle geometry, minimized front-surface dead zone, and high axial thickness resolution.
BENEFITS
Streamlines field operations by enabling instant transducer identification via color-coded top plates, covering diverse applications from ultra-thin tubes to thick steel members.
FEATURES
Color-coded recognition discs (blue/orange/green), selectable frequency options (5.0 MHz, 7.5 MHz, 10 MHz), and versatile active crystal aperture sizes.
BENEFITS
Heavy-duty molded strain relief boot prevents conductor breakage, while the compact profile allows stable coupling across tight elbows, pipe bends, and confined pockets.
FEATURES
Knurled stainless steel casing, flexible molded bend-relief boot, and integral dual coaxial cable terminated with dual Lemo-00 or Microdot connectors.
Thickness Gauge Transducers – Dual Crystal
Color-coded dual-element ultrasonic thickness gauging transducers engineered for residual wall thickness measurement, corrosion mapping, and remaining life assessment in piping, tanks, and industrial assets.
- Precision Residual Wall Thickness Gauging on Process Pipes
- Storage Tanks & Pressure Vessel Corrosion Profiling
- Small-Bore Tubing, Boiler & Heat Exchanger Tube Audits
- Pitting Corrosion & Subsurface Erosion Detection
Thickness Gauge Transducers – Single Crystal
BENEFITS
Delivers micron-level thickness gauging across ultra-thin metals, plastics, and precision sheets by drastically shortening the pulse duration via a heavily damped single-crystal design.
FEATURES
High-frequency (10 MHz – 15 MHz / 20 MHz options) piezoelectric single-crystal element, optimized heavy backing, and fast pulse-recovery acoustics.
BENEFITS
Enables rapid field recognition of frequency and crystal aperture via color-coded caps, preventing surface wear through direct-contact or detachable delay line configurations.
FEATURES
Color-coded identification top caps (red/green), hardened wear faceplate, and stepped nose geometry compatible with direct contact or snap-on delay lines.
BENEFITS
Allows stable, slip-free coupling pressure across confined pockets, curved surfaces, and small components thanks to its knurled compact profile.
FEATURES
Knurled stainless steel cylindrical housing, stepped cylindrical contact nose, and side-entry gold-plated Microdot (Subvis) coaxial connector.
Thickness Gauge Transducers – Single Crystal
Color-coded single-element ultrasonic thickness gauging transducers engineered for ultra-high-precision thickness measurement of thin-walled metals, plastics, composites, and machined components.
- Precision Thin-Sheet Metal & Foil Thickness Gauging
- Extruded Plastics, Bottles & Polymer Wall Audits
- Aircraft Skin & Precision Machined Aerospace Components
- Small-Diameter Precision Tubing & Thin-Walled Pipes
Thickness Gauge Transducers – Delay Line Single Crystal
BENEFITS
Shifts the initial pulse ring-down completely outside the test piece via the acoustic delay line, enabling clean separation of backwall echoes in micro-sheets, foils, and thin-walled plastics.
FEATURES
High-frequency (10 MHz – 20 MHz) piezoelectric single-crystal element, optimized heavily damped acoustic design, and minimized near-surface dead zone.
BENEFITS
Enables independent replacement of the friction-worn polymer tip, shielding the primary probe body and piezoelectric crystal from mechanical wear.
FEATURES
Screw-collar retained replaceable acrylic delay line rod, standard and high-temperature polymer options, and rapid tip replacement design.
All VITRENEMEL grades typically are furnished with a rough matte finish to improve adhesion of the enamel coating. The approximate surface roughness is 55 to 90 micro-inches. A rougher surface finish, 90 to 150 micro-inches, can be provided if required for a specific application.
The dimensional tolerances for VITRENEMEL Steel Sheet products are the same as those for Cold Rolled Steel Sheet as established by ASTM.
BENEFITS
Two-stage knurled shell ensures positive grip and uniform vertical contact force across narrow flanges, recessed pockets, and curved tubing.
FEATURES
Dual-stage knurled stainless steel/brass housing, narrow stepped-nose geometry, and side-entry gold-plated Microdot (Subvis) coaxial connector.
Thickness Gauge Transducers – Delay Line Single Crystal
Precision single-element ultrasonic thickness gauging transducers equipped with replaceable delay lines, designed for high-resolution measurement of ultra-thin metals, plastics, and sensitive aerospace components.
- Precision Ultra-Thin Sheet & Foil Thickness Gauging
- Extruded Plastic Wall & Thermoformed Packaging Audits
- Small-Diameter Precision Tubing & Thin-Walled Pipes
- Aerospace Bond Integrity & Skin Thickness Verification