Phoenix MagMan
BENEFITS
Accommodates up to 12 transducers simultaneously to run Phased Array (PAUT), TOFD, and Pulse-Echo inspections in a single pass, drastically reducing weld inspection cycle times.
FEATURES
Capacity for 2 to 12 spring-loaded probe arms, independent gimbaled probe holders, fully adjustable probe spacing, and rigid modular mounting frames.
BENEFITS
Complies fully with ASME Section V, ISO 13588, and ISO 10863 standards, utilizing high-strength magnetic wheels for slip-free grip and a sealed optical encoder for 1:1 positional tracking.
FEATURES
IP68-sealed waterproof optical encoder, wide operational range from 2″ OD up to flat surfaces, urethane-coated permanent magnetic wheels, and universal instrument encoder connectors.
BENEFITS
Withstands extreme job site wear and mechanical shock across refineries and pipelines, while tool-free adjustment clamps allow rapid reconfiguration for different pipe diameters in minutes.
FEATURES
Hard-anodized aluminum and stainless steel structural components, integrated couplant manifold system, ergonomic steering handles, and heavy-duty wheeled transport case.
Phoenix MagMan
A heavy-duty manual magnetic ultrasonic scanner designed for circumferential and longitudinal weld inspections on pipes and flat plates, supporting up to 12 Phased Array (PAUT) and TOFD probes with precise encoder tracking.
- Circumferential (Girth) Weld Inspection For Oil And Gas Pipelines
- PAUT/TOFD Inspection Of Shell Welds In Pressure Vessels, Boilers And Reactors
- Longitudinal And Transverse Weld Inspection For Storage Tanks And Ship Hull Plating
- Butt Weld Scanning For Heavy Steel Structures, Bridges And Wind Towers
Phoenix Bracelet Scanner
BENEFITS
Ultra-low radial profile and articulated bracelet link design enable effortless weld inspections across dense boiler tube banks, heat exchangers, and restricted process piping where standard scanners cannot operate.
FEATURES
Operating pipe range from 0.5″ (12.7 mm) to 4.5″ (114.3 mm) OD, less than 13 mm radial clearance requirement, dual or single probe configurations, and modular articulated link design.
BENEFITS
Delivers ASME Section V and ISO 13588 compliant PAUT/TOFD inspections, utilizing an integrated sealed miniature optical encoder for precise 1:1 positional defect mapping.
FEATURES
IP68-sealed miniature optical encoder, live A/B/C-Scan and S-Scan data acquisition support, built-in couplant irrigation routing, and universal instrument encoder connectors.
BENEFITS
Cold-rolled full hard unprocessed sheet by Fabrik Steel is the option to choose for applications that require very limited bending and/or roll-forming.Supplied directly from the cold-reduction mill without any annealing to soften the steel, our full hard sheet is highly work-hardened and exhibits a high resistance to denting, with only minimal ductility. The hardness is Rockwell B 84 minimum.
FEATURES
Since the product is supplied directly after cold rolling without further processing, our full hard cold-rolled unprocessed sheet is not subject to the same product standards that have been established for other cold-rolled sheet products.We provide it with a matte or smooth surface finish produced on the cold reduction mill.
Phoenix Bracelet Scanner
An ultra-low profile, modular articulated ultrasonic pipe scanner engineered for rapid Phased Array (PAUT) and TOFD circumferential weld inspections on small-diameter pipes and restricted-access tube bundles.
- Circumferential Weld Inspection For Boiler Tube Bundles, Heat Exchangers And Furnace Tubes
- PAUT/TOFD Inspection For Small-Bore Process Piping In Petrochemical Plants And Refineries
- Tight-Clearance Piping Inspection In Nuclear And Thermal Power Plants
- Restricted-Access Hydraulic And Flowline Inspection On Offshore Platforms
Phoenix MapMan
BENEFITS
Utilizes dual-axis optical encoding to map internal corrosion, erosion, and hydrogen-induced cracking (HIC) across pipes, tanks, and vessels into complete, high-resolution C-Scan grids.
FEATURES
Integrated X and Y dual optical encoders, Phased Array (PAUT) and conventional dual-element probe support, adjustable scanning stroke arm, and live C-Scan/B-Scan data acquisition.
BENEFITS
Home appliances are more than an essential part of our homes. They’re an essential part of life. VITRENEMEL Steel optimize the application of porcelain or vitreous enamel coatings and are manufactured with specialized properties that can achieve both good formability and enhanced aesthetics. Our steel products are cold rolled, producing a high quality finished surface to exceed our customers’ requirements.
FEATURES
Fabrik Steel produces three grades of steel that optimize the application of porcelain (or vitreous) enamel coatings that resist fish-scaling during the enameling process, resist carbon boil during enameling, and provide the sag resistance needed during the firing process.
All VITRENEMEL grades typically are furnished with a rough matte finish to improve adhesion of the enamel coating. The approximate surface roughness is 55 to 90 micro-inches. A rougher surface finish, 90 to 150 micro-inches, can be provided if required for a specific application.
The dimensional tolerances for VITRENEMEL Steel Sheet products are the same as those for Cold Rolled Steel Sheet as established by ASTM.
BENEFITS
Cold-rolled full hard unprocessed sheet by Fabrik Steel is the option to choose for applications that require very limited bending and/or roll-forming.Supplied directly from the cold-reduction mill without any annealing to soften the steel, our full hard sheet is highly work-hardened and exhibits a high resistance to denting, with only minimal ductility. The hardness is Rockwell B 84 minimum.
FEATURES
Since the product is supplied directly after cold rolling without further processing, our full hard cold-rolled unprocessed sheet is not subject to the same product standards that have been established for other cold-rolled sheet products.We provide it with a matte or smooth surface finish produced on the cold reduction mill.
Phoenix MapMan
A high-precision 2-axis manual magnetic ultrasonic scanner engineered for comprehensive X-Y corrosion and erosion C-scan mapping across pipelines, pressure vessels, and storage tanks.
- Corrosion C-Scan Mapping For Oil, Gas Pipelines And Process Lines
- Wall Thickness Scanning Of Shell Plates For Storage Tanks, Boilers And Pressure Vessels
- Hydrogen Damage (HIC/SOHIC) And Wear Analysis In Refineries And Chemical Plants
- Periodic Corrosion Inspection For Ship Hulls, Deck Plating And Offshore Structures
Phoenix Orbital AUT Weld Scanner
BENEFITS
Powered by an integrated motorized drive supporting simultaneous PAUT, TOFD, and Pulse-Echo techniques, delivering operator-independent, repeatable, high-speed circumferential pipe weld inspections.
FEATURES
Motorized continuous and stepped scan control, 4 to 8 probe arm capacity, bi-directional travel capability, and high-torque precision drive motor.
BENEFITS
Fully complies with ASME Section V, API 1104, and ISO 13588 AUT codes, utilizing rigid and flexible orbital track guidance to eliminate axial drift and ensure 1:1 defect positioning.
FEATURES
IP68-sealed optical encoder, modular track systems for pipes from 6″ OD and above, handheld motor controller interface, and universal NDT instrument connectivity.
BENEFITS
Built to endure mechanical shock, dust, and moisture on cross-country pipelines and offshore lay barges, featuring tool-free quick-clamping tracks for fast site deployment.
FEATURES
Hard-anodized aluminum and stainless steel chassis, multi-channel couplant irrigation manifold, spring-loaded gimbaled probe holders, and heavy-duty wheeled transit case.
Phoenix Orbital AUT Weld Scanner
A rugged, motorized automated ultrasonic testing (AUT) scanner engineered with track guidance and multi-probe (PAUT/TOFD) capability for high-speed, repeatable girth weld inspections on pipelines and process piping.
- AUT Girth Weld Inspection For Oil And Gas Pipeline Construction
- High-Speed Weld Inspection For Offshore Pipe-Lay Barges
- Critical Process Piping Weld Inspection In Refineries, Petrochemical And Power Plants
- Quality Verification Of Longitudinal And Circumferential Welds In Pressure Vessel And Tank Fabrication
AXYS Universal Encoding Clamp
BENEFITS
Transforms standard manual probes and wedges into encoded scanning assemblies in seconds, enabling 1:1 positionally accurate flaw sizing and B-Scan/C-Scan data acquisition across welds and composites.
FEATURES
Integrated high-resolution miniature optical encoder, spring-loaded tracking wheel, real-time position feedback, and ultra-lightweight compact footprint optimized for tight spaces.
BENEFITS
Enables ASME Section V and ISO 13588 compliant encoded manual inspections, featuring an adjustable clamping mechanism that fits virtually all phased array (PAUT), TOFD, and conventional UT wedges on the market.
FEATURES
Adjustable universal probe clamping arms, wide wedge width capacity (standard 40 mm to 55 mm compatibility), IP68-sealed encoder housing, and universal instrument connector terminations.
BENEFITS
Enables instantaneous probe changeovers on-site with tool-free thumb screw clamping, while anodized aluminum and stainless steel components ensure long-term durability in rugged field conditions.
FEATURES
Hard-anodized corrosion-resistant aluminum frame, knurled thumb screw fastener, wear-resistant encoder contact wheel, and strain-relieved heavy-duty cable lead.
AXYS Universal Encoding Clamp
A compact, versatile single-axis encoding clamp engineered to quickly attach to virtually any Phased Array (PAUT), TOFD, or conventional ultrasonic wedge, delivering high-precision positional data for encoded manual inspections.
- Manual Encoded Weld Inspection For Oil, Gas Pipelines And Pressure Vessels
- Manual PAUT And TOFD Inspection In Confined Spaces And Restricted-Access Geometries
- Encoded Manual Corrosion And Thickness Mapping For Plates, Tanks And Pipe Walls
- Manual C-Scan/B-Scan Discontinuity Scanning In Aerospace And Composite Panels
CREO Bolt Scanners
BENEFITS
Features a unique direct-drive encoder design that eliminates wheel slip errors, providing 360° precise rotational flaw detection and sizing for thread root fatigue cracks, erosion, and shear fractures
FEATURES
Direct-drive integrated optical encoder, 1″ to 3″ (25.4 mm to 76.2 mm) stud diameter coverage, Sonatest X-Series (X2A/X2B) PAUT probe compatibility, and cam-linked self-centering mounting legs.
BENEFITS
Fully complies with ASME Section V bolt inspection codes, utilizing quick-swap modular attachments to perform both end-face stud inspections and circumferential surface scans on cylindrical components up to 400 mm in diameter.
FEATURES
Quick-swap probe basket and magnetic base attachments, adjustable probe stand-off baseplates, live C-Scan/S-Scan data acquisition support, and universal instrument encoder connectors.
BENEFITS
Slim-Scan (T1/T2) low-profile magnetic configurations securely lock onto bolt heads/nuts, enabling effortless scanning in extremely tight overhead clearances across flange assemblies.
FEATURES
Magnetically attaching Slim-Scan T1/T2 low-profile models, anodized aluminum and stainless steel chassis, wear-resistant contact plates, and heavy-duty protective carry case.
CREO Bolt Scanners
A modular ultrasonic phased array scanner family engineered with direct-drive encoder technology and low-profile magnetic options for in-situ volumetric screening and fatigue crack sizing on bolts and studs without disassembly.
- Critical Flange Bolt Inspection For Petrochemical Plants, Refineries And Pipelines
- Fastener Stud Inspection For Wind Turbine Towers, Blade Roots And Gearboxes
- Periodic Inspection Of Body Bolts In Nuclear Plants, Thermal Power Plants And Pressure Vessels
- Structural Bolt Inspection For Bridges, Viaducts And Heavy Steel Structures
Odi Compact Universal Encoder
BENEFITS
Ultra-compact and lightweight footprint attaches directly to manual probes and wedges in extreme clearance-restricted areas, delivering 1:1 positionally accurate defect sizing and B-Scan/C-Scan mapping.
FEATURES
High-resolution miniature optical encoder disc, spring-loaded independent tracking wheel, sub-millimeter positional feedback, and ultra-lightweight alloy housing.
BENEFITS
Enables ASME Section V and ISO 13588 compliant encoded manual inspections, interfacing seamlessly with virtually all PAUT, TOFD, and conventional wedges via modular bracket kits.
FEATURES
Direct-to-wedge mounting hardware and external clamping adapters, IP68-sealed waterproof enclosure, universal connector options (Lemo, DE15, etc.), and multi-instrument compatibility.
BENEFITS
Slip-resistant high-traction wheel pattern prevents tracking errors across wet, oily, or rough scan surfaces, while sealed stainless steel construction ensures extended service life on site.
FEATURES
High-friction urethane/metallic tracking wheel, hard-anodized and stainless steel armor, heavy-duty strain-relief cable boot, and shock-resistant build.
Odi Compact Universal Encoder
A miniature, waterproof optical encoder engineered to convert manual phased array (PAUT), TOFD, and conventional UT wedges into high-precision encoded scanning systems for confined-space inspections.
- Encoded Circumferential Weld Scanning For Limited-Access Areas, Boiler Tubes And Heat Exchangers
- Encoded Circumferential Weld Scanning For Limited-Access Areas, Boiler Tubes And Heat Exchangers
- Encoded Circumferential Weld Scanning For Limited-Access Areas, Boiler Tubes And Heat Exchangers
- Encoded Circumferential Weld Scanning For Limited-Access Areas, Boiler Tubes And Heat Exchangers
Odi II Compact Dual Probe Scanner
BENEFITS
Accommodates two transducers simultaneously for dual-sided Phased Array (PAUT), single-pass TOFD, or combined PAUT/TOFD inspections, cutting weld scanning time in half.
FEATURES
Dual independent spring-loaded probe arms, adjustable probe centerline spacing, gimbaled probe forks, and versatile wedge compatibility.
BENEFITS
Fully compliant with ASME Section V and ISO 13588 codes, utilizing a sealed high-resolution optical encoder for slip-free 1:1 positional tracking from 2″ OD pipes up to flat plates.
FEATURES
IP68-sealed waterproof optical encoder, operational range from 2″ (50 mm) OD to flat plates, high-grip contact wheel, and universal instrument encoder terminations.
BENEFITS
Low-profile compact frame easily fits into restricted clearances and tight pipe gaps, while tool-free thumb screw adjustments enable pipe-to-pipe reconfiguration in seconds.
FEATURES
Anodized corrosion-resistant aluminum and stainless steel frame, tool-free thumb screws, integrated couplant routing ports, and heavy-duty protective transit case.
Odi II Compact Dual Probe Scanner
A versatile, low-profile manual ultrasonic scanner engineered to hold two probes simultaneously for rapid dual-sided Phased Array (PAUT) and TOFD circumferential weld inspections on pipes from 2″ OD to flat surfaces.
- Circumferential (Girth) Weld Inspection For Oil And Gas Process Piping
- Dual-Probe TOFD Inspection In Confined Spaces And Restricted-Access Pipelines
- Butt Weld Inspection For Pressure Vessels, Boilers And Storage Tanks
- Joint Weld Scanning For Bridges, Wind Towers And Heavy Steel Structures
Bracelet Bore Pipe Weld Scanner
BENEFITS
Enables comprehensive Phased Array (PAUT) and TOFD weld inspections across dense boiler tube bundles and tightly spaced process lines where standard scanners fail, thanks to its ultra-low profile articulated design.
FEATURES
Operating pipe range from 0.5″ (12.7 mm) to 4.5″ (114.3 mm) OD, less than 13 mm radial clearance requirement, articulated modular link architecture, and 1 to 2 probe capacity.
Benefits
Fully compliant with ASME Section V and ISO 13588 inspection codes, utilizing an IP68-sealed miniature optical encoder for slip-free, 1:1 positionally accurate defect mapping around the weld circumference.
Features
High-resolution waterproof miniature optical encoder, live A/B/C-Scan and S-Scan data acquisition support, internal couplant delivery ports, and multi-instrument encoder connectivity.
BENEFITS
Quick-tensioning latch and tool-free snap-together chain links minimize setup and reconfiguration times when moving from pipe to pipe in challenging field environments.
FEATURES
Quick-release adjustable tension latch, tool-free stainless steel add-on links, spring-loaded gimbaled probe holders, and rugged industrial transit case.
Bracelet Bore Pipe Weld Scanner
An ultra-low profile, modular articulated ultrasonic pipe scanner engineered for high-precision encoded Phased Array (PAUT) and TOFD circumferential weld inspections on small-diameter pipes and tight-clearance tube bundles.
- Circumferential Weld Inspection For Boiler Tube Bundles, Heat Exchangers And Furnace Tubes
- Inspection For Small-Bore Process Piping In Petrochemical Plants And Refineries
- Tight-Clearance Piping Inspection In Nuclear And Thermal Power Plants
- Restricted-Access Hydraulic And Flowline Inspection On Offshore Platforms
STIX Upgradeable Weld Scanner
BENEFITS
Scales from a single-probe setup up to 8 probes to combine Phased Array (PAUT), TOFD, and Pulse-Echo methods in a single pass, optimizing capital investment while drastically reducing inspection time.
FEATURES
1 to 8 probe arm mounting capacity, tool-free probe adjustment clamps, independent spring-loaded gimbaled forks, and modular expandable frame bar system.
BENEFITS
Fully compliant with ASME Section V, ISO 13588, and ISO 10863 codes, utilizing an IP68-sealed encoder with magnetic/urethane wheel options for slip-free 1:1 positional defect tracking from 2″ OD pipes to flat plates.
FEATURES
IP68-sealed optical encoder, interchangeable magnetic and non-magnetic urethane wheels, live A/B/C-Scan acquisition support, and universal instrument encoder terminations.
BENEFITS
Future-proof hybrid architecture allows easy on-site field upgrades to motorized or track-guided configurations, while a lightweight hard-anodized chassis minimizes operator fatigue.
FEATURES
Hard-anodized corrosion-resistant aluminum chassis, integrated couplant manifold system, tool-free quick-adjustment fasteners, and heavy-duty wheeled transit case.
STIX Upgradeable Weld Scanner
A highly versatile, modular manual ultrasonic scanner designed for weld integrity inspections on pipes and plates from 2″ OD to flat surfaces, featuring field-expandable frames holding up to 8 PAUT/TOFD probes and upgradeable motorized configurations.
- Circumferential (Girth) Weld Inspection For Oil, Gas Pipelines And Process Piping
- Concurrent Multi-Group PAUT/TOFD Inspection In Pressure Vessels, Reactors And Boilers
- Longitudinal And Transverse Weld Inspection For Storage Tanks And Ship Hull Plating
- Butt Weld Scanning For Bridges, Wind Towers And Heavy Steel Structures
STIX Long Seam Weld Scanner
BENEFITS
Tracks effortlessly along longitudinal seam welds on pipes, tanks, and vessels without axial drift, delivering high-speed volumetric flaw mapping and precise sizing via Phased Array (PAUT) and TOFD.
FEATURES
Multi-probe capacity (2 to 6 probes), independent spring-loaded gimbaled probe arms, adjustable probe centerline spacing, and versatile wedge compatibility.
BENEFITS
Fully compliant with ASME Section V, API 5L, and ISO 13588 codes, utilizing pipe-axis aligned magnetic guide wheels and a waterproof encoder for true 1:1 positional data accuracy along straight runs.
FEATURES
IP68-sealed integrated optical encoder, longitudinal pipe inspection range from 12″ (300 mm) OD up to flat plates, high-strength magnetic alignment wheels, and universal instrument connectors.
BENEFITS
Quickly aligns to the longitudinal seam axis in pipe mills and field fabrication yards, featuring tool-free adjustment clamps for rapid adaptation to varying pipe wall thicknesses and weld bevels.
FEATURES
Hard-anodized corrosion-resistant aluminum and stainless steel chassis, integrated couplant manifold system, ergonomic steering handle, and heavy-duty wheeled transit case.
STIX Long Seam Weld Scanner
A precision-guided manual ultrasonic scanner engineered specifically for longitudinal seam weld inspections on large-diameter pipes, pressure vessels, and fabricated cans using multi-probe Phased Array (PAUT) and TOFD techniques.
- Longitudinal Weld Quality Inspection For Oil & Gas Pipe Manufacturing (L-SAW / ERW)
- PAUT / TOFD Inspection Of Longitudinal Butt Welds In Pressure Vessels & Boiler Shells
- Vertical & Longitudinal Weld Inspection For Storage Tanks & Silo Shells
- Longitudinal Weld Flaw Detection & Discontinuity Screening For Wind Turbine Steel Tower Segments
MultiMag Magnetic Scanner
BENEFITS
Accommodates up to 8 transducers across a rigid frame to execute simultaneous Phased Array (PAUT), TOFD, and Pulse-Echo inspections in a single pass, drastically cutting weld scanning cycles.
FEATURES
Capacity for 2 to 8 spring-loaded probe arms, independent gimbaled probe holders, fully adjustable probe spacing, and modular frame bar assembly.
BENEFITS
Complies fully with ASME Section V, ISO 13588, and ISO 10863 standards, utilizing high-strength magnetic wheels for slip-free tracking and a sealed optical encoder for 1:1 positional defect mapping.
FEATURES
P68-sealed waterproof optical encoder, operational range from 3″ (75 mm) OD up to flat surfaces, urethane-coated permanent magnetic wheels, and universal instrument encoder connectors.
All VITRENEMEL grades typically are furnished with a rough matte finish to improve adhesion of the enamel coating. The approximate surface roughness is 55 to 90 micro-inches. A rougher surface finish, 90 to 150 micro-inches, can be provided if required for a specific application.
The dimensional tolerances for VITRENEMEL Steel Sheet products are the same as those for Cold Rolled Steel Sheet as established by ASTM.
BENEFITS
Hard-anodized aluminum and stainless steel components withstand extreme job site wear and mechanical shock, while tool-free adjustment clamps allow rapid setup changes across varying pipe sizes.
FEATURES
Corrosion-resistant hard-anodized chassis, integrated couplant manifold system, ergonomic steering handles, and heavy-duty wheeled transit case.
MultiMag Magnetic Scanner
A rugged manual magnetic ultrasonic scanner designed for circumferential and longitudinal weld inspections on pipes from 3″ OD to flat surfaces, supporting up to 8 Phased Array (PAUT) and TOFD probes with high-precision encoder tracking.
- Girth Weld Inspection For Oil & Gas Pipelines And Process Piping
- PAUT / TOFD Inspection Of Shell Butt Welds In Pressure Vessels, Boilers & Reactors
- Longitudinal & Transverse Weld Inspection For Storage Tanks & Ship Hull Plating
- Joint Weld Flaw Screening For Wind Tower Segments & Heavy Structural Steel Connections
MagMan Magnetic Wheeled Scanner
BENEFITS
Holds up to 12 transducers simultaneously to execute Phased Array (PAUT), TOFD, and Pulse-Echo inspections in a single pass, drastically cutting weld inspection cycle times.
FEATURES
Capacity for 2 to 12 spring-loaded probe arms, independent gimbaled probe holders, fully adjustable probe spacing, and rigid multi-probe mounting frames.
BENEFITS
Complies fully with ASME Section V, ISO 13588, and ISO 10863 standards, utilizing high-strength magnetic wheels for slip-free grip and a sealed optical encoder for 1:1 positional tracking.
FEATURES
IP68-sealed waterproof optical encoder, wide operational range from 2″ OD up to flat surfaces, urethane-coated permanent magnetic wheels, and universal instrument encoder connectors.
BENEFITS
Hard-anodized aluminum frame withstands extreme job site wear and mechanical shock, while tool-free adjustment clamps allow rapid reconfiguration for different pipe diameters in minutes.
FEATURES
Hard-anodized aluminum and stainless steel structural components, integrated couplant manifold system, ergonomic steering handles, and heavy-duty wheeled transport case.
MagMan Magnetic Wheeled Scanner
A heavy-duty manual magnetic wheeled ultrasonic scanner designed for circumferential and longitudinal weld inspections on pipes and flat plates, supporting up to 12 Phased Array (PAUT) and TOFD probes with precise encoder tracking.
- Girth Weld Inspection For Oil & Gas Pipelines
- Multi-Channel PAUT / TOFD Inspection Of Shell Welds In Pressure Vessels, Boilers & Reactors
- Longitudinal & Transverse Weld Inspection For Storage Tanks & Ship Hull Plating
- Butt Weld Flaw Screening For Heavy Structural Steel, Bridges & Wind Towers
ROTIX Chain Weld Scanner
BENEFITS
Accommodates up to 6 probes simultaneously to execute Phased Array (PAUT), TOFD, and Pulse-Echo methods in a single pass across both ferromagnetic and non-ferromagnetic (austenitic) piping.
FEATURES
Capacity for 1 to 6 spring-loaded probe arms, independent gimbaled probe holders, fully adjustable probe centerline spacing, and modular frame bar architecture.
BENEFITS
Fully compliant with ASME Section V, ISO 13588, and ISO 10863 codes, utilizing a precision chain guide track and sealed optical encoder for drift-free 1:1 positional defect mapping.
FEATURES
IP68-sealed optical encoder, modular chain link assembly adaptable for pipes from 1.5″ (38 mm) OD and above, dual-sided chain tensioning buckle, and universal instrument encoder terminations.
All VITRENEMEL grades typically are furnished with a rough matte finish to improve adhesion of the enamel coating. The approximate surface roughness is 55 to 90 micro-inches. A rougher surface finish, 90 to 150 micro-inches, can be provided if required for a specific application.
The dimensional tolerances for VITRENEMEL Steel Sheet products are the same as those for Cold Rolled Steel Sheet as established by ASTM.
BENEFITS
High-grade stainless steel links and hard-anodized aluminum frame resist mechanical wear and corrosion, while a tool-free snap-on chain design allows rapid deployment in minutes.
FEATURES
Hard-anodized corrosion-resistant chassis, tool-free stainless steel link assembly, integrated couplant manifold system, and heavy-duty wheeled transit case.
ROTIX Chain Weld Scanner
A versatile, modular chain-guided manual ultrasonic scanner engineered for circumferential weld inspections on both ferromagnetic and non-ferromagnetic pipes from 1.5″ OD and above, supporting up to 6 Phased Array (PAUT) and TOFD probes.
- Girth Weld Inspection For Oil, Gas & Refinery Process Piping
- Weld Inspection For Stainless Steel, Austenitic & Non-Magnetic Pipelines
- In-Service PAUT / TOFD Inspection For Power Plant Boilers, Heat Exchangers & Steam Lines
- Butt Weld Screening For Pipe & Tubular Penetrations On Offshore Platforms